Cisco Power Injector CP-PWR-INJ

Features:

•A desktop and desk area single port mid span injector with integrated power

•802.3af/IEEE Power over Ethernet (PoE) support

•Gigabyte Ethernet support

•Full enterprise level compliance

•Phone casing composition: Polycarbonate Acrylonitrile butadiene styrene (ABS) plastic

•Power is integrated for country specific power cords used for connection to AC wall outlet

•LAN connection: Maximum Ethernet cable length: 100 m from switch to device; Type: RJ-45; Label: DATA-Network

•Maximum Ethernet cable length: 100 m from switch to device; Type: RJ-45; Label: DATA and PWR-PHONE

•Power and Status LEDs

•Stackable up to 2 injectors

•Injects power into two unused pairs in the Ethernet cable: 4 and 5 (negative) and 7 and 8 (positive)

•Electrical Input: - AC input voltage range: 90 to 264 VAC - AC input current: 0.5A (RMS) @ 90 VAC at maximum load - AC input frequency: 47 to 63 Hz - Maximum inrush current: 20A @ 115 VAC, 60 Hz, Cold Start, 25°C 40A @ 230 VAC, 50 Hz, Cold Start, 25°C

•Electrical Output: - DC output voltage: 48 VDC nominal - Maximum output power: 15.5W @ 48 VDC

•Performance efficiency: - 53% minimum at 30-49% of maximum load and 120 VAC, 60 Hz - 75% minimum at 50-100% of maximum load and 120 VAC, 60 Hz